Shop | nyvera GmbH

KL-1108 The KL-1108 bench without backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 44.5 cm x 40 cm	KL-1109 The KL-1109 bench without backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 44.5 cm x 53 cm	KL-1111 The KL-1111 bench with backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 80 cm x 56 cm
KL-1112 The KL-1112 bench without backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 44.5 cm x 56 cm	KL-1118 The KL-1118 bench with backrest and armrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 85 cm x 60 cm	KL-1119 The KL-1119 bench with backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 85 cm x 55 cm
KL-1121 The KL-1121 bench with backrest and armrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 98 cm x 65 cm	KL-1122 The KL-1122 bench without backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 49 cm x 45 cm	KL-1123 The KL-1123 bench with backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 87 cm x 58 cm
KL-1125 The KL-1125 bench with backrest and armrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 80 cm x 63 cm	KL-1126 The KL-1126 bench without backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 43.5 cm x 48 cm	KL-1131 The KL-1131 bench - reclining bench without backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 172 cm x 76 cm x 50 cm
KL-1132 The KL-1132 bench - reclining bench without backrest is made of a combination of materials: metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 170 cm x 70 cm x 50 cm	KL-1124 The KL-1124 bench with backrest and armrest is made of a combination of materials: cast metal and wood. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Painted - Plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 80 cm x 65 cm	KL-1113 The KL-1113 bench with backrest and armrest is made of a combination of materials: metal and HPL. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HPL Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 97 cm x 65 cm
KL-1114 The KL-1114 bench without backrest is made of a combination of materials: metal and HPL. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HPL Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 46 cm x 45 cm	KL-1127 The KL-1127 bench with backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 86 cm x 63 cm	KL-1128 The KL-1128 bench without backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 43 cm x 55 cm
KL-1129 The KL-1129 bench without backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 40 cm x 42 cm	KL-1130 The KL-1130 bench without backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 84.2 cm x 40 cm	KL-1115 The KL-1115 bench with backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 76 cm x 68 cm