Shop | nyvera GmbH

RB-0155 The balancing bridge RB-0155 consists of a wooden structure and 7 different round pieces of wood for balancing, which are placed at different heights. The round timbers are connected to the wooden structure by stainless steel chains. The construction of the balancing bridge is made of robinia wood. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3.8 m x 1.25 m x 1.4 m	RB-0156-2 The playhouse RB-0156-2 consists of a 40 cm high platform with a floor and two fences as well as a sandpit. Next to the sandpit there is a locust tree trunk on which there is a mechanism with a bucket for playing in the sand. This mechanism is also installed on one of the pillars of the playhouse. The structures of the construction and the sandbox are made of locust wood. The floor and railing are made of robinia boards with a minimum thickness of 25 mm. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 2.9 m x 2.2 m x 1.9 m	RB-0156-4 The playhouse RB-0156-4 consists of a 40 cm high platform with a floor and two fences, a sand slide and a table for playing. Next to the table there is a locust tree trunk with a mechanism with a bucket for playing in the sand. This mechanism is also installed on one of the pillars of the playhouse. The structures of the construction are made of robinia wood. The floor and railing are made of robinia boards with a minimum thickness of 25 mm. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 1.7 m x 1.6 m x 1.7 m
RB-0128 The balancing RB-0128 parkour is a set of different climbing frames suitable for developing children's motor skills and consists of: a climbing net, a running rope, a climbing wall in the shape of a net, a bridge to cross, a balance beam and balancing posts. The basic structure is made of robinia wood. The robinia wood is of high quality and resistant to all weather conditions. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 13.8 m x 9.2 m x 2.9 m	RB-0059 The balancing bollards RB-0059 are made of robinia wood. Robinia wood is of high quality and resistant to all weather conditions. They are suitable for balancing, jumping and sitting. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 0.2 m x 0.2 m x 0.3 m	RB-0150 The posts RB-0150 are made of robinia wood. Robinia wood is of high quality and resistant to all weather conditions. They are suitable for balancing, jumping and parkour obstacles. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 0.2 m x 0.2 m x 2.0 m
KL-6 The KL-6 bench with backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 88 cm x 69 cm	KL-7 The KL-7 bench without backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 47 cm x 59 cm	KL-8 The KL-8 bench with backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 90 cm x 68 cm
KL-9 The KL-9 bench without backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 194 cm x 47 cm x 50 cm	KL-10 The KL-10 bench with backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used are at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 185cm x 95cm x 69cm	KL-22 The KL-22 bench without backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 265 cm x 45 cm x 50 cm
KL-EXCLUSIVE The KL-EXCLUSIVE bench without backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white and black concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 280 cm x 50 cm x 80 cm	KL-20 The KL-20 bench with plant pot without backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 266 cm x 86 cm x 66 cm	KL-24 The KL-24 bench with plant pots without backrest is made of a combination of materials: concrete and wood. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The individual elements of the bench must be screwed together using the screws provided. The wooden slats are already screwed to the hot-dip galvanized iron supports at the factory and all screw feedthroughs are pre-drilled. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 332 cm x 87 cm x 66 cm
KL-URBAN The KL-URBAN bench with plant pot without backrest is made entirely of concrete. The concrete elements are made of white concrete with a stone aggregate mixture, the vertical surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, so-called washing, in the manufacturing process itself. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Installation method: The bench is installed free-standing on a concrete slab with a minimum thickness of 12 cm or on concrete foundations. Delivery condition: The bench is delivered in individual elements. Assembly can be carried out quickly and easily. All metal parts are protected by hot-dip galvanizing, the screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 210 cm x 49 cm x 50 cm	RB-0025 The play tower RB-0025 is a set consisting of a tower with a platform height of 90 cm and a tunnel. A slide leads down from the platform on one side and a climbing net on the other. There is a ladder next to the tower. The tower structures consist of robinia trunks. The floors and railings of the tower are made of locust boards with a minimum thickness of 25 mm. Robinia wood is of high quality and resistant to all weather conditions. The slide is made of stainless steel. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3.8 m x 2.4 m x 2.8 m	KO-1 Waste container KO-1 made of concrete, with or optionally without a hot-dip galvanized inner container made of sheet metal. The surface is determined by the material that can be selected. The white concrete (other colors on request) receives a concrete mix containing stone aggregate, the surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, the so-called washing in the manufacturing process itself. The concrete color is determined by the natural gray tone of the concrete; this concrete mix does not contain any stone aggregate. Intended for outdoor use, street furniture and public spaces. The waste container can be set up free-standing. Inner container without lock. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (Ø x H): 45 cm x 60 cm
KO-3 Waste container KO-3 made of concrete with two stainless steel rings, with or optionally without a hot-dip galvanized inner container made of sheet metal. The white concrete receives a concrete mix containing stone aggregate, the surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, the so-called washing in the manufacturing process itself. Intended for outdoor use, street furniture and public spaces. The waste container can be set up free-standing. Inner container without lock. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (Ø x H): 45 cm x 62 cm	KO-2 Waste container KO-2 made of concrete with stainless steel protective roof and integrated ashtray. With stainless steel waste bag holder. The white concrete receives a concrete mix containing stone aggregate, the surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, the so-called washing in the manufacturing process itself. Intended for outdoor use, street furniture and public spaces. The waste container can be set up free-standing. Without locking. Remove the waste bag to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (Ø x H): 40 cm x 105 cm	KO-5 Waste container KO-5 made of concrete with stainless steel protective roof and integrated ashtray. With stainless steel waste bag holder. The white concrete receives a concrete mix containing stone aggregate, the surfaces receive a high-quality surface layer with visible stone aggregate, which they receive through the final process, the so-called washing in the manufacturing process itself. Intended for outdoor use, street furniture and public spaces. The waste container can be set up free-standing. Without locking. Remove the waste bag to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (Ø x H): 40 cm x 87 cm