Shop | nyvera GmbH

KL-1113 The KL-1113 bench with backrest and armrest is made of a combination of materials: metal and HPL. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HPL Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 97 cm x 65 cm	KL-1114 The KL-1114 bench without backrest is made of a combination of materials: metal and HPL. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HPL Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 46 cm x 45 cm	KL-1127 The KL-1127 bench with backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 86 cm x 63 cm
KL-1128 The KL-1128 bench without backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 43 cm x 55 cm	KL-1129 The KL-1129 bench without backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 40 cm x 42 cm	KL-1130 The KL-1130 bench without backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 84.2 cm x 40 cm
KL-1115 The KL-1115 bench with backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 76 cm x 68 cm	KL-1116 The KL-1116 bench with backrest is made of a combination of materials: metal and HDPE. The bench is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Seat with high-quality workmanship: - HDPE Installation method: The bench is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 80 cm x 56 cm	ST-1301 The ST-1301 table is made of a combination of materials: metal and wood. The table is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The table is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 50×30×30 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 72 cm x 68.3 cm
ST-1302 The ST-1302 table is made of a combination of materials: metal and wood. The table is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The table is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 50×30×30 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 72 cm x 68.3 cm	ST-1303 The ST-1303 table is made of a combination of materials: metal and wood. The table is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The table is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 50×30×30 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 188 cm x 77 cm x 80 cm	ST-1305 The ST-1305 table is made of a combination of materials: metal and wood. The table is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The table is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 79 cm x 73 cm
ST-1304 The ST-1304 table is made of a combination of materials: metal and HPL. The table is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal profiles: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Table top with high-quality workmanship: - HPL Installation method: The table is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations with dimensions of 70×40×40 cm. Delivery condition: Delivered fully assembled. The screws used correspond to at least quality class 8.8. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 180 cm x 79 cm x 73 cm	KO-1209 Metal waste container KO-1209, with lock. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. With lock, key included. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 26.5 cm x 83.6 cm x 31.5 cm	KO-1211 Metal waste container KO-1211, with lock. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. With lock, key included. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 26.5 cm x 73.8 cm x 31.5 cm
KO-1212 Metal waste container KO-1212, without lock. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. Without lock. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 26.5 cm x 72.8 cm x 31.2 cm	KO-1215 Metal waste container KO-1215, with lock, with ashtray. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. With lock, key included. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 30 cm x 102 cm x 30 cm	KO-1213 Metal waste container KO-1213, with lock. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. With lock, key included. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H): 34 cm x 82.5 cm
KO-1214 Metal waste container KO-1214, with lock. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. With lock, key included. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H): 34 cm x 68 cm	KO-1201 The waste container KO-1201 without lock is made of a combination of materials: metal and wood. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of metal elements: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Wooden slats with high-quality workmanship: - Fir/spruce - Acacia - Larch - Oak Surface / Color - Choices: - Environmentally friendly deep impregnation process - Ecological water-based impregnation agent, colorless or in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. Without lock. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 40 cm x 75.5 cm x 40 cm	KO-1208 Metal waste container KO-1208, without lock. Hot-dip galvanized inner container made of sheet metal included. The waste container is intended for outdoor use. During production, individual product adjustments are possible according to customer requirements. Surface protection of the metal structure: - Galvanized - Plasticization in two layers, base and final layer in the desired color - Hot-dip galvanized with additional plasticization in two layers, base and final layer in the desired color Installation method: The waste bin is installed on a concrete slab with a minimum thickness of 12 cm or on concrete foundations measuring 40x40x40 cm. Also suitable for setting in concrete. Without lock. Remove the inner container to empty. The buyer is obliged to ensure the unloading of the goods. Dimensions (W x H x D): 47 cm x 70 cm x 47 cm