Shop | nyvera GmbH

Art. 6018 Wheel with bracket transportable, multipurpose. You can secure all of our goals by turning the side star grip screw: -Football, -Volleyball. Inserting the rear screw ensures easy transportation.	Art. 5002 Monotubular volleyball system in galvanized steel diam. 70 mm complete with net tensioner, fixing to the floor using bushes to be cemented. Net height adjustment system using galvanized steel slides. Complete with bushes and caps. UNI-EN 1271	Art. 5525 Outdoor protections for single pole volleyball / beach volleyball systems, made of expanded rubber covered with CARBON PVC lining, velcro closure.
Art. 5003 Monotubular telescopic volleyball system in galvanized steel diam. 70 mm. With telescopic net adjustment as per F.I.P.A.V. regulations. Telescopic system for net adjustment with double pulley on the top of the pole. Fixing to the floor using supplied bushes to be cemented. Complete with net tensioning winch.	Art. 5005 Monotubular volleyball system in galvanized steel diam. 100 mm. complete with net tensioner, fixing to the floor using bushes to be cemented. Net height adjustment system using galvanized steel slides. Complete with bushes and caps. UNI-EN 1271	Art. 5010 Wall-mounted volleyball system with net tensioner, in galvanized steel tubing diam. 70 mm, length 1500 mm, to be fixed to the wall with plates using plugs. Adjustment of the net by means of sliders with telescopic sliding and tensioning winch equipped with belt for hooking the net.
Art. 5417 Red padded protection, easy hook and loop closure on both sides. Along one side there is a velcro band with a buttonhole 5cm wide and 166cm long, on the opposite side there are 5 hook velcro buckles 5 cm wide and 25 cm long. All this to guarantee an excellent seal. Dimensions: length 166 cm Width 50 cm Thickness 3cm lower recess 15x15 cm Protection for our. Art-5010 plant	Art. 5014 Volleyball Steel/aluminium telescopic system made according to F.I.V.B. standard. Steel tubular diameter 90 mm, hot painted, with hole on one side for adjusting the tension of the net, removable crank to operate the internal winch. Internal aluminum sliding door for pre-set height variation according to 3 heights: 243 cm men's 224 cm women 215cm mini volleyball Convenient and quick height locking system, using an external handwheel applied to the back of the steel pole. New!	Art. 5013 Monotubular telescopic aluminum volleyball system compliant with F.I.V.B. standards. built entirely in aluminum alloy, new reinforced section to give more stability and robustness to the system, bushes and caps in aluminum, central reinforcements in robust aluminum section special alloy 6005, innovative self-braking net tensioning winch without rack and with accident-prevention ppl tie rod (this innovative system allows for low maintenance of the system and the rack will no longer need to be replaced). Both the crank for tensioning the net and the one for adjusting the height of the poles are removable and placed on the outside of the pole, making it easier to tension the net on an open space and do not create dangerous protrusions; the net cable is attached directly without snap hooks because it is fixed to the retractable winch on the pole, at the upper end the cable slides on a steel wheel mounted on a bearing; Nylon skates fixed inside the pole facilitate the sliding of the pole. The net can be raised or lowered without having to dismantle it, i.e. under tension without any problem. Complete with laser-cut aluminum bushes and covers, hidden insert for extracting the cap without any protrusion, system painted in metallic gray with epoxy powders. Total weight approximately 40 kg., External pole section 100x120 mm. Minimum sliding height 219 cm. Maximum sliding height 250 cm. UNI-EN 1271
Art. 5009 Monotubular aluminum volleyball system mod. "All Aluminium" built entirely in aluminum alloy, new reinforced section to give more stability and robustness to the system, aluminum bushes, central reinforcement in robust aluminum section in special anti-bending 6005 alloy. Innovative self-braking net tensioning winch without rack and with accident-prevention ppl tie rod (this innovative system allows for little maintenance of the system and the replacement of the old rack will no longer happen), removable net tensioning crank placed outside the system which facilitates tension of the net on an open space, at the end laser-cut aluminum caps with hidden insert to avoid impediments, painted in metallic gray with epoxy powders, equipped with carabiners for the application of the net. Pole section 100x120 mm. Adjustable height from 2 to 2.5 m Weight: 37 kg (both poles) UNI-EN 1271	Art. 5411 Rubber protections for single pole volleyball system art. 5009. With crank hole for tensioning the net. CHARACTERISTICS: Foam padding density 30 kg./mc. PVC carbon cover, velcro closure. Thickness = 5 cm. Height = 200cm.	Art. 5413 Rubber protections for telescopic monopole volleyball system art. 5013. With holes to insert the crank into the pole to adjust the tension and height of the net. CHARACTERISTICS: 30 kg/m3 density foam padding. Thickness = 5 cm. Height = 200cm.
Art. 5029 Trellis volleyball system with space-saving aluminum tie rods mod. "All Aluminium" built entirely in aluminum alloy, new reinforced section to give more stability and robustness to the system. Space-saving steel tie rods. Anti-torsion ground fixing plate in laser-cut steel, innovative self-braking net tensioning winch without rack and with accident-prevention ppl tie rod (this innovative system allows for little maintenance of the system and the replacement of the old rack will no longer happen), removable net tensioning crank placed on the outside of the system which facilitates the tension of the net on open space, at the end plastic caps to avoid impediments, painted in metallic gray with epoxy powders, equipped with carabiners for the application of the net. UNI-EN 1271	Art. 5412 Rubber protections for trellis volleyball system art. 5029. With hole to insert the crank into the pole for tensioning the net. complete with protections for rear tie rods CHARACTERISTICS: 30 kg/m3 density foam padding, covered in carbon PVC. Thickness = 5 cm. Height = 200cm.	Art. 5020 Trellis volleyball system for tennis use, competition model. Structure composed of a central upright in round tube diam. 70 mm. in galvanized steel, anchored on a large support plate with holes for fixing to the ground using dowels. Painted tubular steel tie rods diam. 40mm., equipped with wheels for transport. Adjustment of the height of the net using galvanized slides. Complete with net tensioner. UNI-EN 1271
Art. 5527 Outdoor protections for trellis volleyball facilities. Height 200cm, zip and velcro closure, PVC carbon lining in standard color RED, the protection consists of two central poles and 4 for the rear pylons.	Art. 5024 Steel trellis system composed of two painted steel case holder frames complete with two 8 mm thick plates. resting on the ground and 4 boxes in painted steel of the size of 90 cm. per side 30x30 cm. Central upright in round tube diam. D = 70 mm and thickness 3 mm, anchored on a large support base 8mm thick with a particular shape to give greater stability (there are no welds that weaken the structure but it is a single laser-cut plate) equipped with wheels for transport and prepared with holes for fixing to the floor braced structure in tubular steel section 40 mm, thickness 2 mm, epoxy powder coating, adjustment of the network by means of galvanized slides and tensioning machine, on request at no other cost this system can be adapted to tennis. Tensioning of the net via internal winch. A ballast of 150 kg per pole is recommended.	Art. 5406 Protection pad for cases, for system 5021-5024.
Art. 5021 Steel trellis system composed of two painted steel case holder frames complete with two 8 mm thick plates resting on the ground and 4 boxes in painted steel of the size of 90 cm per side 30x30 cm. Central upright in round tube diam. 70 mm and thickness 3 mm, anchored on a large support base 8 mm thick with a particular shape to give greater stability (there are no welds that weaken the structure, but it is a single laser-cut plate) equipped with wheels for transport and prepared with holes for fixing to the floor braced structure in tubular steel section 40 mm, thickness 2 mm, epoxy powder coating, adjustment of the network by means of galvanized slides and tensioning machine, on request at no other cost this system can be adapted to tennis. A ballast of 150 kg per pole is recommended.	Art. 5022 Volleyball system transportable on wheels with large multipurpose base. Wheels equipped with brakes.	Art. 5419 Protective pad for item 5409.