Shop | nyvera GmbH

Art. 4262 Wall-mounted basketball system, fixed, wooden backboard 180x105 cm. Painted tubular steel structure to be fixed with dowels, made up of 4 braced trellises, sturdy 50 mm section, 320 cm overhang. Complete with wooden backboards measuring 180x105 cm, baskets and nets.	Art. 4260 Wall-mounted basketball system, fixed, wooden backboard 180x105 cm. Painted tubular steel structure to be fixed with dowels, made up of 4 braced trellises, sturdy 50 mm section, 165 cm overhang. Complete with wooden backboards measuring 180x105 cm, baskets and nets.	Art. 4265 Basketball system for wall mounting, foldable on the side, wooden backboards. Cantilever of 320 cm, wall frame made of tubular steel, hinged with pins and bushings. Horizontal net structures in 50x50 mm tube with reinforcements in diagonal 30x30 mm tube, with male-female manual joint, with special bar to lock in the playing position. Fixing to the wall with expansion plugs or any plugs with external counter plates (not included). Mounting bolts in class 10.9 epoxy powder coating. The peculiarity of this system is that it can fold 90° parallel to the pitch and place parallel to the mounting wall. Standard horizontal overhang of 320 cm, other dimensions available on request.
Art. 4271 Wall-mounted basketball/mini-basketball facility with 320 cm overhang from the back wall steel structure painted with thermosetting polyurethane powders, braced structure wooden backboards complete with heavy reinforced frames and baskets. Upon request, we can supply the complete basketball/mini-basketball system, approved reclining hoops and plexiglass backboards with under-basket protections. UNI-EN 1270	Art. 4270 Ceiling basketball facility compliant with FIBA standards equipped with anti-oscillation bracing, suitably sized and calculated steel structure, painted with thermosetting polyurethane powders, without ceiling cables with backward or forward rotation, obtained by means of a drum lifting motor, equipped with an electromechanical limit switch. Anchoring to roof beams using special jaws, including specific anchors for fixing and special ceiling fixing carpentry. Reclining hoop compliant with FIBA regulations, reinforced net hooking the basket to the support frame to avoid stress, FIBA approved crystal backboard, wraparound underbasket protection both in the front and in the back. On request, mini-basketball/basketball device with manual adjustment with rod control adjustable from 245 cm to 305 cm and many other accessories.	Art. 4289 Electrified ceiling basketball system compliant with FIBA regulations, with anti-swing bracing. Steel structure painted with thermosetting polyurethane powders, without cables and safety restraints ceiling reclining with backward rotation, obtained by means of a drum lifting motor, equipped with an electromechanical limit switch. Anchoring to the roof beams by means of appropriately sized brackets and special jaws. Lowering of the rotation point at a height of approx. 800 cm through the aid of rails, able to allow micro-adjustments and a complete rotation and packaging to the cover. FIBA approved reclining basket Reinforced regulatory mesh hooking the basket to the support frame, to avoid stresses on the glass and on the containment frame of the same. 14 mm plexresist crystal backboard, with total notch for direct attachment of the basket to the frame. Enveloping under-basket protection both in the front and in the back mini-basket basket device with manual adjustment, with rod control, adjustable from a height of 260 to 305 cm. anti-fall device (metal cable fall arrester), completely contained in an anti-shock metal casing.
Art. 4276 Device for height adjustment from basket to mini-basket, applicable to all our systems during construction. Structure in tubular steel painted hot with epoxy powders, sliding and adjustment screw in galvanized steel, control rod included.	Art. 4277 Device for height adjustment from basketball to mini-basketball, applicable to our systems during construction, structure in rectangular steel profile painted with epoxy powders, sliding elements and adjustment screw in galvanized steel, control rod included. Particularly robust model for backboards and baskets that have a certain consistency and weight (crystal type, plexiglass and collapsible basket).	Art. 4282 Basketball system with hydraulic function, structure in white painted steel profile, backboard perpendicular and height adjustment. Basket-minibasket/rest positioning movement obtained by means of a manual hydraulic pump with non-return valve and removable control rod. Movement and positioning of the system takes place via 4 wheels, 2 swivel and 2 fixed, which lower automatically when the system is closed and make it easily transportable. Set of wooden protections covered in washable sky also placed under the horizontal support arm of the backboard. Backboards in 12 mm safety glass equipped with steel frame, subframe and protections, reclining baskets and nets, rear ballast already incorporated and protected. Footprint of the base: 108x190 cm. Overall dimensions of the closed system: 350x108x140h cm. Single ballast weight 485 kg. Single structure weight including ballast about 800 kg. UNI-EN 1270
Art. 4290 FIBA MacShot approved adjustable manual basketball system with springs, official system for the 2005 European Championships. UNI-EN 1270	Art. 4285 Basketball system with hydraulic function, painted steel profile structure, hinges and joints mounted on adjustable ball bearings and bushings. Adjustment of the backboard in perpendicularity and height. Play/Rest positioning movement obtained by means of an electrically operated hydraulic unit (V.220,380 Hz) cylinder complete with non-return valve cantilever structure 325 cm, with single pole. Movement by means of 4 wheels, 2 fixed 2 swivelling, incorporated in the fairing which raise and lower automatically with the raising and lowering of the lift. Front protection in foam covered in skay, washable. Ballast included. Safety crystal backboards, reclining baskets and cotton nets, rear ballast already incorporated, basket-minibasket movement included. Ballast weight 770 kg. UNI-EN 1270	Art. 4286 Basketball system with hydraulic function, painted steel profile structure, perpendicular and height adjustment of the backboard. Basket/rest positioning movement obtained by manual hydraulic pump with non-return valve and removable control rod. Movement and positioning of the structure takes place via 4 wheels, 2 swivel and 2 fixed, which lower automatically when the system is closed and make it easily transportable. Set of wooden protections covered in washable sky also placed under the horizontal support arm of the backboard. Backboards in 12 mm safety glass equipped with steel frame, subframe and protections, reclining hoops and nets, rear ballast already incorporated and protected. 24-second indicator excluded Footprint of the base: 130x180 cm Overall dimensions in closed position: 350x130x140h cm. Single ballast weight 500 kg Single structure weight including ballast about 900 kg UNI-EN 1270
Art. 4287 Half basketball system with hydraulic function, painted steel profile structure, perpendicular and height adjustment of the backboard. Basket/rest positioning movement obtained by manual hydraulic pump with non-return valve and removable control rod. Movement and positioning of the structure takes place via 4 wheels, 2 swivel and 2 fixed, which lower automatically when the system is closed and make it easily transportable. Set of wooden protections covered in washable sky also placed under the horizontal support arm of the backboard. Backboards in 12 mm safety glass equipped with steel frame, subframe and protections, reclining hoops and nets, rear ballast already incorporated and protected. 24-second indicator inserted in the center of the guard Footprint of the base: 130x180 cm Overall dimensions in closed position: 350x130x140h cm. Single ballast weight 500 kg Single structure weight including ballast about 900 kg UNI-EN 1270	Art. 4288 Half basketball system with hydraulic function, structure in hot galvanized steel profile, perpendicular and height adjustment of the backboard. Basket/rest positioning movement obtained by manual hydraulic pump with non-return valve and removable control rod. Movement and positioning of the structure takes place via 4 wheels, 2 swivel and 2 fixed, which lower automatically when the system is closed and make it easily transportable. Set of wooden protections covered in washable sky also placed under the horizontal support arm of the backboard. Backboards in 12 mm safety glass equipped with steel frame, subframe and protections, reclining hoops and nets, rear ballast already incorporated and protected. 24-second indicator inserted in the center of the guard Footprint of the base: 130x180 cm Overall dimensions in closed position: 350x130x140h cm. Single ballast weight 500 kg Single structure weight including ballast about 900 kg UNI-EN 1270	Art. 4241 Mechanism with wheels for transporting the basketball system Art. 4248, consisting of 4 parts and a steel lever. Cold galvanized tubular steel structure on Teflon-coated aluminum wheels, rotatable on bearings.
Art. 4051 Basketball backboard made of melamine resin 180x105 cm, thickness 10 mm, painted white, black lines. Recommended for outdoor use.	Art. 4052 Basketball backboard made of plexiglass 180x105 cm, thickness 15 mm, complete with frame in white painted steel, plexiglass panel in white in accordance with regulations.	Art. 4062 Basketball replacement backboard made of plexiglass 180x105 cm, thickness 15 mm, without frame, prescribed dimensions. Plexiglass plate complete with white play lines.
Art. 4053 Basketball backboard made of melamine resin 180x120 cm (old legislation), thickness 10 mm, painted white, black lines. Recommended for outdoor use.	Art. 4055 Basketball backboard in treated steel sheet for outdoor use, powder coating, mod. American 135x90 cm, suitable for outdoor.	Art. 4056 Basketball backboard 112x73 cm, with painted basket and net, made of very resistant thermoset plastic, completely ribbed on the back to give it high stability.