Shop | nyvera GmbH

RB-0010 The playhouse RB-0010 is a set consisting of a tower with a roof and a platform without roof in the extension, all with a platform height of 90 cm. A slide leads down from the platform on one side and a climbing net on the other. There is a ladder next to the tower with a roof. Constructions and balance beams are made of robinia wood. The roofs, floors and railings of the tower are made of robinia boards with a minimum thickness of 25 mm. Robinia wood is of high quality and resistant to all weather conditions. The slide is made of stainless steel. The rope is made of polypropylene with a steel core with a diameter of 16 mm, connected by metal and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3.1 m x 2.8 m x 3.4 m	RB-0011 The playset RB-0011 consists of two playhouses with a roof, a platform without a roof, a climbing net, a bridge, a slide, rotating elements and a bench. The construction is made of robinia wood. The roofs, fences and floors are made of robinia boards with a minimum thickness of 25 mm. Robinia wood is of high quality and resistant to all weather conditions. The slide is made of stainless steel. Climbing nets are made of polypropylene ropes with a steel core with a diameter of 16 mm, connected with aluminum or plastic connectors. The bridge is made of non-slip material. The device has no cracks or sharp edges that could pose a risk of injury while playing. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 5.5 m x 3.5 m x 3.4 m	RB-0015 The playhouse RB-0015 consists of two towers measuring 95 x 95 cm and triangular floor platforms connected by a rope bridge. On the tower, which is located at a platform height of 120 cm, there is a slide and a climbing pole, and there are also 3 balance beams at different heights. On the tower, which is located at a platform height of 150 cm, there is a slide, a climbing net and, next to it, sloping columns with climbing stones for crawling and climbing. Tower structures and balance beams are made of robinia wood. The roofs, floors and railings of the tower are made of robinia boards with a minimum thickness of 25 mm. Robinia wood is of high quality and resistant to all weather conditions. The slides are made of stainless steel. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 9.5 m x 8.9 m x 3.4 m
RB-0028 The playset RB-0028 consists of two towers with a platform height of 25 cm. The towers are connected to each other by ropes. Black plywood doors are installed on both towers. The tower structures consist of robinia trunks. The floors and railings of the tower are made of locust boards with a minimum thickness of 25 mm. Robinia wood is of high quality and resistant to all weather conditions. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 4,3 m x 2.6 m x 1.7 m	RB-0029 The balancing parkour RB-0029 consists of 6 opposing and diagonally arranged robinia columns. Each shape is notched at the bottom to make transitions easier. Robinia wood is of high quality and resistant to all weather conditions. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 2.5 m x 1.2 m x 1.3 m	RB-0030 The RB-0030 fitness and play equipment belongs to the category of equipment for outdoor recreation and exercise. The device has the function of developing the strength and flexibility of the upper limbs and the muscles in the shoulders, chest, abdomen and back. The construction is made of acacia wood, which is of high quality and can withstand all weather conditions. The metal parts are pipes and sheets made of stainless steel. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3.2 m x 1.2 m x 1 m
RB-0031 The RB-0031 fitness and play equipment belongs to the category of equipment for outdoor recreation and exercise. The device has the function of strengthening the muscles of the upper and lower parts of the chest, back and abdominal muscles. The construction is made of robinia wood, which is of high quality and can withstand all weather conditions. The metal parts are pipes and sheets made of stainless steel. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 1.7 m x 0.75 m x 1.4 m	RB-0032 The RB-0032 play tunnel is part of the equipment for children's playgrounds, made of robinia wood and hard plastic, with a minimum diameter of 600 mm, which is used for crawling through. Robinia wood is of high quality and resistant to all weather conditions. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 1.1 m x 1.2 m x 0.9 m	RB-0033 Balancing device RB-0033 for children's playgrounds made of robinia bollards of different heights. At the beginning and end of the play equipment there are 1.7 m high robinia trunks connected with a rope. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3.7 m x 0.5 m x 1.7 m
RB-0036 The climbing frame RB-0036 is made from robinia trunks so that the middle trunk stands upright and the other trunks are connected to it at different angles. Robinia wood is of high quality and resistant to all weather conditions. All screws used are of quality 8.8 and are protected by plastic covers. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 4.9 m x 4.4 m x 1.7 m	RB-0040 The climbing frame RB-0040 is a pentagonal play equipment made of robinia wood. It consists of: double slide bar, slanted climbing beam, climbing ladder, climbing pole and climbing holds placed on the beam. A vertical pentagonal network of ropes for walking is attached to the top, with the fact that some parts are connected to the beams at a height of 1.2 m and others at a height of 1.5 m. The double slide bar and the climbing bar are made of a metal profile tube made of stainless steel. The climbing ladder consists of ropes and handles made of polypropylene. The rope is made of polypropylene with a steel core with a diameter of 16 mm, connected by metal and polypropylene connectors and stainless steel chains. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 4.8 m x 3.8 m x 2.4 m	RB-0042 The balancing parkour RB-0042 is a children's playground equipment suitable for developing children's motor skills and consists of: vertical ropes with climbing stones and climbing plates, balancing beams, a rope bridge, holding and balancing ropes and two rope traverses. The basic structure is made of robinia wood. The robinia wood is of high quality and resistant to all weather conditions. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 7.5 m x 6.6 m x 2.4 m
RB-0044 The RB-0044 climbing frame is part of the equipment for children's playgrounds and consists of vertical, diagonally arranged robinia trunks that are connected by a mesh. The climbing net is made of ropes. The basic structure is made of robinia wood. The robinia wood is of high quality and resistant to all weather conditions. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3.5 m x 0.3 m x 2.2 m	RB-0045 The RB-0045 climbing frame is part of the equipment for children's playgrounds and consists of vertical, diagonally arranged robinia trunks that are connected by a mesh. The climbing net is made of ropes. The basic structure is made of robinia wood. The robinia wood is of high quality and resistant to all weather conditions. The ropes are made of polypropylene with a steel core with a diameter of 16 mm and are connected with aluminum and polypropylene connectors. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 1.8 m x 0.9 m x 1.75 m	RB-0047 The free-standing slide RB-0047, with a 0.9 m high platform placed on a structure. The construction consists of robinia trunks. The slide is made of a combination of stainless steel sheet and stainless steel tubes and the platform is made of robinia wood with a minimum thickness of 25 mm. The ladder rungs and the cross brace are also made of stainless steel. Robinia wood is of high quality and resistant to all weather conditions. All other metal parts are protected by hot-dip galvanizing. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 2.3 m x 1.02 m x 1.8 m
RB-0049 The free-standing slide RB-0049, with a 1.5 m high platform placed on a structure. The construction is made of robinia wood. The slide is made of a combination of stainless steel sheet and stainless steel tubes, the slide platform is made of robinia wood with a minimum thickness of 25 mm. Robinia wood is of high quality and resistant to all weather conditions. All other metal parts are protected by hot-dip galvanizing. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3.1 m x 1.02 m x 2.4 m	RB-0148 The rocker RB-0148 is made of solid robinia in the shape of a bee with tubular handles, made of stainless steel. The metal spring to which the rocker is attached is protected by powder coating. There are no cracks or sharp edges on the device that could pose a risk of injury while playing. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 0.85 m x 0.45 m x 0.85 m	RB-0095 Classic and rustic outdoor garbage container RB-0095 is made of robinia wood. The inner container is made of hot-dip galvanized sheet metal. The base consists of a robinia trunk and is attached to a point foundation. The wood is finely sanded several times for pleasantly smooth surfaces and is delivered natural as standard. As a rustic, classic model, the waste collector fits the playgrounds in our Robinia series. All other metal parts are protected by hot-dip galvanizing. There are no cracks or sharp edges that could pose a risk of injury. The screws used correspond to at least quality class 8.8. Robinia wood is of high quality and resistant to all weather conditions. Depending on the shape of the raw material, there may be differences in the shape of the robinia trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 0.37 m x 0.3 m x 0.76 m
RB-0060 The balancing beam RB-0060 consists of an approximately 3 meter long robinia trunk that is attached to the two shorter beams. Robinia wood is of high quality and resistant to all weather conditions. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 3 m x 0.2 m x 0.5 m	RB-0062 The balancing beam RB-0062 consists of two robinia trunks attached at different heights. Robinia wood is of high quality and resistant to all weather conditions. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 5 m x 1.5 m x 0.59 m	RB-0085 The rocking device RB-0085 consists of a robinia trunk in combination with robinia boards. It is attached to the base using two rocker springs. The spring is protected by a powder coating process. Handles are made of stainless steel. The swing is designed to provide 4 playgrounds. The device has no cracks or sharp edges that could pose a risk of injury while playing. The screws used correspond to at least quality class 8.8 and are protected by plastic caps. Robinia wood is of high quality and resistant to all weather conditions. Depending on the shape of the raw material, there may be differences in the shape of the black locust trunks between the model image and the finished product. The device is intended for public use. Dimensions (L x W x H): 1.7 m x 1.3 m x 0.7 m